Consult International Marine’s INTERLAC DATA SHEET brochure on NauticExpo. Page: 1/4. PRODUCT INFORMATION. Colour. Range of colours on request. Finish. High Gloss. Specific Gravity. Volume Solids. 48% average. INFORMATION FOR. INTERLAC Colour. Gloss Level. Volume Solids. Typical Thickness. Theoretical Coverage. Practical Coverage. Method of Application.
|Published (Last):||15 November 2016|
|PDF File Size:||12.33 Mb|
|ePub File Size:||6.22 Mb|
|Price:||Free* [*Free Regsitration Required]|
International Interlac does not have any potable water approvals so we cannot say that it is safe. Open the catalog interlav page 3. Send us your question.
Unmixed material in closed containers should be maintained The primer to be used We recommend that Customer first purchases the smallest Product available or access an industry interlaf colour chart in person and not digitally to ensure that the colour is acceptable for its purposes. The Online Boating and Maritime Exhibition.
International Interlac is a maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate iinterlac environmental conditions. Suitable for areas of limited chemical exposure where an economical single pack finish coat is required. Thinning may be required. Is it safe to collect interlaf water from the roof painted with interlac RAL opal green paint?
Alkyd Finish Interlac is not suitable for use on immersed areas.
Alkyd Finish When used as part of an approved scheme, this material has the following certification: All unused interkac should be stored in tightly closed containers. Open the catalog to page 4. DO NOT thin more than allowed by local environmental legislation. Interlac interpac only be applied over recommended anticorrosive primers. VOC values are typical and are provided for guidance purposes only. Also for use as a cosmetic finish coat for alkyd based systems intended for both interior and exterior exposure.
It is your responsibility to read the Product Data Sheets available below before you place an order and prior to application of the product. Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. International Interlac Reference: Alkyd Niterlac Airless Spray Conventional Spray This material is a one pack coating interoac should always be mixed thoroughly with a power agitator before Not recommended.
Related Searches Marine epoxy filler International Marine antifouling International Marine epoxy primer International Marine anti-corrosion primer Zinc primer International Marine merchant ship antifouling International Marine merchant ship primer High-gloss coating International Marine professional vessel antifouling International Marine professional vessel primer International Marine topcoat coating International Marine multi-use antifouling Ballast primer International Marine two-component coating Tin-free antifouling Zinc coating International Marine epoxy coating Acrylic coating International Marine tank coating International Marine 6665.
Consult your local International Paint representative for specific recommendations. For use as an easily maintained cosmetic finish coat on areas above the waterline. The figures stated above are approximate. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the interllac, surface absorption, texture and application method.
There is no detrimental effect on product performance. The content of this website is our best recommendation and is not advice. The minimum purchase order quantity for the product is 1. Typical Coverage per coat. Apply in good weather.
International Paint 1 gal. Interlac CL Haze Gray Gloss – – Northern Safety Co., Inc.
Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. Inerlac ensure you refer to all datasheets for full application information.
This product is no longer in stock. Low 6655 prices Our best trade prices on everything! The question has been correctly sent. I would like to hear about offers and services: These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances.
International Interlac is a single component alkyd gloss enamel finish. Thoroughly flush all equipment with International GTA Open the catalog to page 2. International International Interlac is a single component alkyd gloss enamel finish.