The Uniden Bearcat BCT15X is the follow-up to Uniden’s premier analog mobile scanner, the manual for the radio is contained on a CD-ROM, in PDF format. DImage_/Manual/ (1 of 3)5/26/ .. This page applies to the following scanner(s): BCDXT BCT15X Uniden® and Bearcat® are registered trademarks of Uniden America Corporation. View and Download Uniden BCT15 owner’s manual online. scanner radio with You can adjust the level of the following tones: Key Beep, BearTracker Alert.
|Published (Last):||25 November 2016|
|PDF File Size:||8.90 Mb|
|ePub File Size:||6.25 Mb|
|Price:||Free* [*Free Regsitration Required]|
Custom band plans require that you enter both a lower and an upper base frequency value. You will not hear any audio in this mode. If the frequency has not been stored, it stores the frequency into a created group named ‘ Found Channels ‘, then resumes searching.
Access two-digit system Quick Keys by pressing [. Point of Interest POI: Enter the new frequency and press Hold.
Uniden BCT15 Owner’s Manual
Scroll to ‘ Set Heading ‘ and press. The quick keys for the system s and group s containing the priority channel s have to be enabled and unlocked or the scanner will display ‘Priority Scan No Channel’. Press and hold 7 Att for global attenuation.
Type I and Type II. DOT appears if Dept. Quick Search – lets you search from the currently-tuned frequency or channel or enter a frequency and start searching. Priority ID Scan This function is similar to conventional priority although there is no interruption during the transmission.
To move the cursor to the right, press . In Tone-Out Standby Mode: For example, if you assign Block 0 as 12, the scanner prompts you for block 2, the mahual block available, instead of block 1.
UNIDEN BCT15 OWNER’S MANUAL Pdf Download.
Connecting An Extension Speaker Connecting an Extension Speaker In a noisy area, an optional amplified extension speaker, bc15x in the right place, might provide more comfortable listening. With a repeater based system, the repeater is located on top of a tall building or on a radio tower that provides great visibility to the area of operation.
The scanner scans a system for the duration you set using the ‘system hold time’ option.
Enter a range from. Page Set Modulation — Set the modulation type for the paging signal. To toggle ‘Hold Mode’ on a background scan or search press Hold. Tone-Out Standby Mode is used if you know and use programmed tones.
There may be 3 or 4 frequencies assigned as primary or alternate control channels but only one control channel will be active at a time. You can also toggle modulation for a site in scan hold mode by pressing then 9 MOD. Press to toggle temporary Alert Mute on or off in Any Mode.
Bear Tracker Warning System – alerts you when channels normally used by public safety systems and ‘mobile extenders’ are in use nearby. No first then enter the 2 digits. To store frequencies or talk group IDs you find during Search and Store, you must first select a nearcat where the frequencies or talk group IDs will be stored.
Priority Scan If you activate a Priority Scan while scanning, the radio interrupts its scan every two seconds to check the priority channel P-Ch. When you have selected a service search or custom search range sthe scanner looks for active frequencies within the range s and ‘ Search and Store ‘ appears on the display’s lower line and the system name and search range name s appear on the display’s upper line.
No alerts sound, even if a Tone-Out matches one you have programmed in hold mode. You can’t start Key-Safe mode and Startup Configuration at the same time i. These icons show the modulation type. POL includes Police and Sheriff services. Programming General Settings The following section deals with the general settings of the scanner. Therefore, if a user was transmitting a multi-select call on talk groupthe scanner would actually receive those transmissions on In Weather Scan Mode: